Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Grater group:
1.
Taking into account of the machine use modality and its use destination, the moving elements aren't isolated from fixed
protections, moving protections or other safety devices.
2.
On handle and pressure group a micro switch is placed, which stops the grater roll rotation when it is possible to access
through the grater mouth;
3.
In the inferior zone of the grater group in correspondence of the grated product exile a grating form fixed protection is
present, which prevent the fingers access towards the grater roll.
Grating
form Fixed
protection
CHAP. 4. TRANSPORTATION, PUT ON SERVICE AND USE
The machine management is allowed only to the authorized personnel and opportunely educated and endowed
of a sufficient technical experience.
Before to switch on the machine perform the following operations:
Read with attention the technical documentation,
Know what protections and emergency devices are available on the machine, their location and
functioning.
The not authorized use of commercial parts and accessories making part of the protections and safety devices
can cause some malfunctions and the ranger situation beginning for the operators. The operator must besides
have received an adequate training.
WORKING POSITIONS AND OPERATORS TASKS
As described in the instructions manual for the use, the machine is designed to be driven from an operator skilled and
informed on the residual risks, but with the competencies, in safety matter, of the maintenance employees.
The normal working zone of the operator is:
1.
The machine lateral zone near the hopper (defined loading zone) in normal conditions of functioning for the food
product manual loading operations in the hopper and during the pestle use to direct the food product inside the machine
neck, with the fixed protections in closed and blocked position;
2.
The machine anterior zone near the food product unloading zone in normal conditions functioning for the food product
manual drawing operations stored in a proper container, with the fixed protections in closed and blocked position
TRANSPORTATION, HANDLING AND STORING
All transportation and handling operations must be performed from informed and trained personnel and must have read
and understood the safety prescriptions showed in the present instructions manual for the use. Occur:
1.
Perform the machine handling and transportation always when you find it uncharged;
2.
Verify that the lifting means are able to support the loading weight and overall dimensions in safety
conditions and that are approved and subjected to a regular maintenance,
3.
Adopt all necessary measures to assure the means and loads maximum stability in relation to their masses
and barycentre,
4.
Avoid to make suffer to the machine rude shaker or accidental collisions during the moving and the
loading,
5.
Perform the handling with continue movements, without pulls or repeated impulses.
03-2008-TRITACARNE-GRAT-STAMPA.doc
Pressure
handle
with micro
switch
Pag.
di
9
9
Publicidad
Capítulos
Tabla de contenido
