TECNOMOTOR ZIPTEC II TM 530 Manual De Instrucciones página 90

Produzido por Tecnomotor Eletrônica do Brasil S/A - REPRODUÇÃO PROIBIDA - Eventuais erros ou defeitos favor comunicar tecnomotor@tecnomotor.com.br
4.2 - Oscilloscope
Operating mode of the oscilloscope:
stp - step by step
1
con - continued
aut - smart probe
Time base:
2
.5ms, 1ms, 2ms, 5 ms, 10ms, 20ms, 50ms, .1s, .3s
Amplitude (volts per division):
.5V, 1V, 2V, 5V, 10V, AUT
3
3KV, 5KV (secondary function)
Choose the type of trigger
M, , ,
4
PI, VV, ET+, ET- (secondary function)
5 Indication setting trigger level
6 Trigger level indicator
5 - How to connect and disconnect the Ziptec
5.1 - How to connect Ziptec
Press
beep and a screen with the version of the software.
5.2 - How to turn off the Ziptec
Press and hold down
off.
The Ziptec also turns off automatically after 15 minutes of non-use.
. The Tecnomotor logo appears on the screen followed by a
for more than 4 seconds until the screen turns
TM 530
88