Safety Advice For Maintenance; Maintenance Interval Schedule - Checchi & Magli AL-S14 PLUS Manual De Uso Y Mantenimiento

Safety advice for maintenance

Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary

Maintenance interval schedule

The table shows the maintenance intervals for the ma-
chine in the maximum set-up.
Some components described may not be part of the set-
up of the machine actually in use and therefore should
Frequency Component
Compacting roller
Hoeing shares
Ridging disks
Every hour
External conveying ploughshares
Internal conveying ploughshares
Much sheet pressure wheels
Lift frame
Every day
Warning and hazard plates
Every 25 hours Support for mulch sheet roll - idler roller
Machine components
Every 50 hours Nuts and bolts
Compacting roller
Every 150 hours Tyres
Tyre check
Check the tyres for wear and if they feature tears or signs
of ageing, they must be replaced.
Check tyre pressure and restore if necessary (see "Speci-
fications" schedule).
English language
MAINTENANCE INFORMATION
maintenance envisaged in the instruction manual.
Special maintenance operations (non included in
this handbook) require a specialised workshop on
the premises which meets the requirements speci-
fied by the relative laws in force (appropriate equip-
ment suitably trained staff etc.); if you do not have a
compliant workshop, contact an authorised one.
be disregarded.
To guarantee constant, efficient and safe machine op-
eration, ensure all the maintenance envisaged by the
manufacturer is carried out.
Maintenance intervals
Type of work
Cleaning
Greasing
Inspection
Inspection
Greasing
Greasing
Tightening
Greasing
Pressure check
The pressure must be checked with the weight of the
work vehicle entirely on the ground and with nothing
and nobody on the work vehicle.
33
7
Manual reference
Lubrication diagram
Information and safety signs
Lubrication diagram
Lubrication diagram
Lubrication diagram
Tyre check
Use and maintenance