Cleaning Modes - Amibot PRIME 2 Manual Del Usuario

EN
Operating the appliance
Setting a delayed start
Figure 1
Press the PLAN button on the remote control (Figure 1) for 3 seconds.
The delay time will flash on the display. Using the arrow buttons,
modify the hours and minutes (Figure 2), then press ON/OFF (Figure
3).
For example: The actual time is 8 am. The delayed start time is 01:00. The robot will
therefore start its cleaning cycle at 9 am every day of the week.
To cancel a schedule, reset the scheduled PLAN time to 0. To do
so, follow the same steps as above. Press the PLAN button for 3
seconds to validate.
NOTES:
• The hours and minutes selected do not determine the time that the robot will start
its cleaning cycle; it is the time delay in relation to the actual time for every day of
the week.
• Scheduled cleaning and the remote control times are cancelled when the batteries
are changed. Reset them as described above.

Cleaning modes

The robot has 7 cleaning modes. These routes can be selected using
the remote control. AUTO mode can also be selected on the robot.
Figure 2
16
Figure 3