Amibot PRIME 2 Manual Del Usuario página 25

Maintenance
Filters
Access the filters via the dust bin. Simply pull the HEPA filter's grey
tab to unclip it.
1. The HEPA filter cannot be cleaned, otherwise it would become
damaged. To extend the filter's life, gently shake it to remove
any small dust particles that could accumulate. If the HEPA filter
is damaged, you are recommended to replace it to ensure that
your robot's filter performance is maintained.
2. The HEPA filter may contain dust, shake it to clean it.
3. The prefilter cannot be removed from the dust bin. Gently shake
the dust bin to remove any dust particles.
1
2
3
23
EN