Troubleshooting; Table: Malfunctions And Possible Causes - Amibot PRIME 2 Manual Del Usuario

EN

Troubleshooting

Please contact AMIBOT technical department in the following
cases:
• If the appliance has been dropped, damaged or come into
contact with water.
• If the power cable is damaged.
• If the battery is defective.
Table:
Malfunctions and possible causes
To avoid breakdowns/malfunctioning, regularly check and clean the
appliance accessories.
No Malfunction
The appliance
01 does not switch
on.
The robot
02 does not move
correctly.
Cause
1. The appliance is not
switched on.
2. The appliance has run
out of battery.
1. The floor is wet.
2. The dust bin is not
attached correctly.
3. The central brush is
not inserted correctly.
28
Solution
1. Switch the power but-
ton to ON.
2. Charge the robot
using its home base or
plug it in to the power
cable.
1. Dry the floor.
2. Remove and reinsert
the dust bin.
3. Remove and reinsert
the brush in its cavity.