Presser Foot Lifter; Foot Pressure Dial; Attaching And Detaching Presser Foot - Janome HD9 Manual De Instrucciones

Presser Foot Lifter

q Presser foot lifter
w Normal up position
e Highest position
The presser foot lifter q raises and
lowers the presser foot.
You can raise it higher e than the
normal up position w to help you place
thick material under the foot.
NOTE:
The machine will not run if the presser foot is in up
position.

Foot Pressure Dial

q Foot pressure dial
w Setting indicator
The foot pressure control dial should be
set at "3" for regular sewing.
Reduce the pressure for appliqué,
sewing on fine synthetics and elastic
fabrics.
Set the dial at "1" when sewing extra fine
fabrics.
NOTE:
Do not reduce the foot pressure lower
than "0".

Attaching and Detaching Presser Foot

q Setscrew
To change the presser foot, raise the
presser foot lifter.
Loosen the setscrew q, choose the
proper foot and insert it from the bottom.
Tighten the setscrew q with the large
screwdriver to secure the foot.
e
w
q
q
12
q
0
1
2
w
3
4
5
q