To Remove Bobbin Case And Bobbin; Setting The Spool Of Thread - Janome HD9 Manual De Instrucciones

To Remove Bobbin Case and Bobbin

CAUTION
Turn the power switch off and unplug the sewing
machine from the electrical outlet
q Hook cover plate
w Hook cover
e Latch
r Bobbin case
t Bobbin
z Raise the needle and presser foot.
Remove the hook cover plate q and open the
hook cover w.
x Pull open the latch e of the bobbin case r. Take
the bobbin case straight out of the hook.
• To remove the bobbin from the bobbin case:
Release the latch, then drop the bobbin t out of
the bobbin case as illustrated.

Setting the Spool of Thread

q Spool of thread
w Spool pin
e Spool cap
• Setting a spool of thread:
Place a spool of thread q on the spool pin w
with the thread coming off the spool as shown.
Attach the spool cap e, and press it firmly against
the spool of thread.
r Spool holder
t Net
• Setting the thread cone:
Place the spool holder r on the spool pin, then
place the thread cone on the spool holder.
Cover the thread cone with the net t if the spool
thread is shaky when sewing.
z
q
w
14
x
e
r
t
e
q
w
r
r
t