SATA AE1016H Instrucciones De Uso página 78

7.4.2.4
In case of the inner tube, raise the dismounting head, load the inner tube and fit the valve core.
7.4.2.5
78
AE1016H/AE1016H-3
中文
EN DE
First, load the bead according to (4.2.1) to (4.2.3), place
the upper bead on the tail of dismounting head, and then
place the cylindrical tire-pressing roller and block on the
tire of which the tire-pressing block is positioned at the
appropriate distance from the tire-pressing roller so that
the upper bead is lower than the tip of changing head (Fig.
20). Rotate the round turntable clockwise and keep rotating
the turntable until the tire is fully loaded (Fig. 21).
Fig. 20
Fig. 21
RU KO PT JA ES