MWE-850-XXL-4.book Seite 36 Freitag, 8. Juli 2005 10:29 10
All manuals and user guides at all-guides.com
Technical description
Example 1 (see 6, page 5)
Objects which are not in the detection area of the sensors from the very start
cannot be detected.
Example 2 (see 7, page 5)
When moving towards an object with an irregular or jagged surface,
the shortest distance to the object may not be signalled. In the example,
A is not signalled, but only B or C instead.
Example 3 (see 8, page 5)
For diagonal obstacles, the shortest distance A is signalled.
Example 4 (see 9, page 6)
In this case, MAGIC WATCH displays the distance A. As the vehicle
approaches, the audible indicator changes to the stop signal. As the
vehicle approaches even further, the distance A goes into the blind spot,
so that MAGIC WATCH signals the distance from point B.
Caution!
As these four examples show, situations can arise where the
device fails to display an object or does not display the shortest
distance.
The device does not relieve you of your obligation to take special
care when reversing. Therefore, always be extremely careful
when reversing.
If an object enters the blind spot of the sensors, MAGIC WATCH
automatically shows the distance to the next object. This means
the piezo speaker changes from fast to medium beeps and the
display shows a different distance.
In this case, always stop the vehicle immediately and investigate
the situation.
36
magic watch