Waeco MAGIC WATCH MWE-850-4XXL Instrucciones De Montaje Y De Uso página 43

MWE-850-XXL-4.book Seite 43 Freitag, 8. Juli 2005 10:29 10
All manuals and user guides at all-guides.com
magic watch
➤ Insert the socket of the piezoelectronic speaker into the socket of the
extension cable (see e A, page 7).
➤ Insert the four-pole cube plug of the connection cable (f 6, page 7)
into the socket of the control device.
Make sure the locking pin catches.
➤ Insert the six-pole plug of the connection cable (f 6, page 7) into the
socket of the connection box.
Make sure the locking pin catches.
➤ If you also wish to use the camera and monitor when driving forwards,
connect the red cable (f 7, page 7) of the connection box to a positive
connection (e.g. ignition, terminal 15).
➤ If you also wish to use the camera and monitor only when reversing,
connect the red cable (f 7, page 7) of the connection box to the positive
connection (+) of the reversing light.
➤ Connect the black cable (f 8, page 7) of the connection box to the to the
earth wire (–) of the reversing light or to earth (bodywork).
To connect the monitor, (f 9, page 7) you require an additional
cinch cable which is not included in the scope of delivery.
➤ Connect the monitor cable supplied (4 8, page 4) to the monitor.
➤ Connect the monitor cable (4 8, page 4) with the cinch cable.
➤ Insert the plug of the monitor cinch cable in the "To Monitor" socket
(f 9, page 7).
➤ Connect the cinch cable to the camera.
➤ Insert the plug of the camera cinch cable in the "To Camera" socket
(f 10, page 7).
Installing MAGIC WATCH
43