Product Care - Össur FORMFIT POST-OP KNEE Instrucciones De Uso

Cool Foam
Use the shortening kit as follows:
1. Put the double D-rings from the kit onto each shortened end of the
struts. Make sure the double D-rings are on the outer side (Figure 12a).
2. Put the plastic rivet through the hole and the double D-ring. The top
of the rivet must point to the outer side (Figure 12b).
3. Attach the hook and loop fastener over the rivet (Figure 12c).
4. Assemble the brace again (refer to "Donning the Brace" above).

PRODUCT CARE

The foam pads can be hand washed with mild soap. Leave to dry. Do not
tumble dry.
PRODUCT MATERIAL LIST
Polyamide, polyamide with glass fiber, polyurethane, steel, stainless steel,
aluminum, zinc.
DISPOSAL
All components of the product and packaging should be disposed of in
accordance with respective national environmental regulations. Users
should contact their local governmental office for information on how
these items can be disposed of in an environmentally sound manner.
WARRANTY
Plastic parts and hinges 3 months warranty. Foam pads and leg straps 30
days. 6 months free from defects.
8