Yakima HoldUp Manual Del Usario página 2

Insert Base Into
hItch receIver.
The holes in the base
must align to the holes
in the hitch receiver.
rotate Base to
up posItIon
• Pull spring pin to release base.
• Lift frame.
• Release spring pin. Pin should
snap into place.
attach second traY to Base.
Align holes in base to holes in tray.
• Insert bolt, washer, and lock-
washer, in order shown.
• Tighten with supplied wrench.
1033533E-2/15
Fasten hItch Bolt.
• Insert hitch bolt and lock washer,
from RIGhT To LEFT.
• Tighten with adjustable wrench.
attach FIrst traY to Base.
Align holes in base to holes in tray.
• Install bolt,
lock-washer,
and washer, in
order shown.
• Tighten with
supplied
wrench.
wheel strap
LowER TRAY:
pivot arm
ImPoRTANT: wheel strap
is to your right, and pivot
arm is to your left.
UPPER TRAY:
ImPoRTANT: wheel
strap is to your left, and
pivot arm is to your right.
SECURE hitch bolt
with safety clip.
wheel strap
pivot arm