Finishing The Installation - LUCCI Air CLIMATE Manual De Instrucciones

Climate Installation Instructions
INSTALLING THE CANOPY (Fig. 9)
Fig. 9
BLADE INSTALLATION (Fig.10)
1. Attach the blade (C) to blade bracket kit (D) and secure the blade to blade holder by tightening 3 screws
(B).
2. Attach the blade holder assembly to motor (F) and secure it by tightening the 2 motor screws (E).
3. Repeat to install the remaining blades.
4. Finally install the bottom cover (H) to shaft (G) of motor by rotating it clockwise.
5 | P a g e

FINISHING THE INSTALLATION

1. Tuck all the connections neatly into the ceiling outlet box.
2. Slide the canopy (A) up to the mounting bracket and place the key
hole slots over the mounting screw (D) on the mounting bracket.
3. Rotate the canopy (A) until the screw head (B) locks in place at
the narrow section of the key hole.See Fig. 9.
4. Secure the canopy by tightening the two mounting screws (D).
Now, attach the canopy cover (E) to canopy and secure it by pushing
the lugs into the holes (C).
NOTE: Do not over tighten the mounting screw on the mounting
bracket.
Fig. 10