Finishing The Installation; Using Your Ceiling Fan - LUCCI Air NAUTILUS Instrucciones De Instalación

Nautilus Fan Installation Instructions
Ensure the ground wiring is secure and correct, by performing a continuity test from the fan's accessible
•
metal body back to the ground terminal at the mounting bracket.
Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy and
•
that the wires are not damaged during this step. Ensure the canopy edge (2) is inserted into the slot of
the canopy cover (1) to maintain waterproof.
Install the canopy to the hanger bracket using the screws provided.
•
SETTING DIP SWITCHES
When two or more fans are located near each other, you may desire to have the receiver/transmitter for each
fan set to a different code, so that the operation of one fan does not affect the operation of the other fans.
The DIP switches for the receiver are located on the flat surface of the receiver. The DIP switches for the
transmitter are in the battery compartment. Fig. 11.
NOTE: Ensure that the power to the supply wires has been turned off before setting the code.
Change the position of the DIP switches in the remote transmitter and the receiver. Make sure that the DIP
switches match in the remote receiver and transmitter. If they don't match, the transmitter will not function.
Fig. 12
7 | P a g e

FINISHING THE INSTALLATION

USING YOUR CEILING FAN

Fig. 11
Fig. 10
Fig. 12
V1.0 (09/2019)