Finishing The Installation - LUCCI Air AIRFUSION Manual De Instrucciones

Type A Installation Instructions
INSTALLING THE CANOPY
Fig. 9
BLADE INSTALLATION
1. Insert the blade screws through the blade then secure the blade to the motor by tightening the 3
screws. Fig.10
2. Repeat this process to install the other blades to the motor.
3. Finally install the bottom cover to the shaft by rotating it clockwise. Fig. 11
Fig. 10
5 | P a g e

FINISHING THE INSTALLATION

1. Loosen the 2 screws from the bottom of the mounting bracket.
2. Slide the canopy up to the mounting bracket and place the key hole on the
canopy over the screw on the mounting bracket, turn the canopy until it locks in
place at the narrow section of the key holes and secure it by tightening the two set
screws. Avoid damaging the electrical wiring prepared previously.
Fig. 11