Left And Right Bracket Locks; Accessories On Bracket Locks - Olsen VERSATILE Manual Del Usuario

Used for attaching accessories to the side
rails. They are identified according to the side of the
seat to be installed. The bracket lock for the left
side (1) receives the letter "L" and the right one (2)
receives the letter "R".
To adjust the height (6) or turning (7) of the
accessory, turn
counterclockwise. Adjust the accessory to the desired position and
tighten the plastic handle (3) by turning it clockwise.
To adjust the position of the rails (8), pull the metal lever (4)
counterclockwise by loosening the bracket on the side rail. Adjust
the accessory to the desired position and turn the metal lever (4)
clockwise.
Note: the metal lever (4) moves only in the area indicated in the
figure to the side. To turn it the metal lever (4) clockwise, push it
upwards causing the lever to pass through the metallic knob's
axis (5), and then rotate it again.

5.9.1 - Accessories on Bracket Locks

Accessories which can be installed on the Versatile Table by using bracket locks:
The Versatile Table allows the attendance of patients both lying down
and sitting. In each of these conditions, the installation of the accessories to
the side rails must be carefully observed to avoid damages to procedures,
equipment and patient.
When moving the equipment, ensure that the accessories do not collide
with one another or with other elements of the equipment, like figure be side.
The positioning of the accessories on the side rails must be made
according to the needs to carry out each procedure, but the interaction
between the accessories, during the equipment´s movement it´s operator´s
responsibility.
the plastic handle (3)
10
Through the left and right bracket locks,
these accessories can be adjusted in
height, depth and rotation on the axis.