Description And Operating Of The Equipment; Remote Foot Pedal - Olsen VERSATILE Manual Del Usuario

5 - Description and Operating of the Equipment

Technical Name: Examination Table
The Versatile Table is an automated equipment for patient accommodation on clinical and outpatient
exams and gynecological procedures.
It is equipped with 2 electrical motors to perform 4 individual movements, controlled by remote foot
pedal.
It performs clinical positioning for an emergency condition, allowing brain's irrigation by gravity, with slow
movements to the maximum negative scale (-5° from horizontal). It has
patient's access to the equipment.
Before starting to use your equipment make sure that it is properly installed, connected to the mains, with
the circuit breaker On and the mains powered.
On the electrical panel, set the On/Off switch (1) to the "I" position. The
switch (1) will light green indicating that the equipment is ready for use.
The electrical panel also it has a fuse holder for equipment (2), an auxiliary
socket (3) and a fuse holder for this socket (4).
To turn Off the equipment: press the On/Off switch (1) to the "O" position.
The headrest (1) was designed to be easily removed
from the backrest according to the procedure need.
It has 2 fixing rods (2) for the fitting.
It can be accompanied by the auxiliary pillow (3) has 2
strips with Velcro (4) for easy positioning and removal for
®
cleaning.
The armrests (1) have upholstery in
the same color and characteristics as the
Performance Gyneco Table.
It has adjustable rods (2) that allow
the movements on side rails (3) for depth
adjustment. It can also be used to assist in
patient's lateral containment when he is
lying on the Performance Gyneco Table.
To adjust the armrest (1): pull the
metal lever (5) counterclockwise to loosen it.
Position the armrest (1) and turn the metal lever (5) clockwise to fasten it on the rail.
Note: the metal lever (4) moves only in the area indicated in the above figure. To turn it the metal lever (5)
clockwise, push it upwards causing the lever to pass through the metallic knob's axis (4), and then rotate it
again.
Trade Name: Versatile Table
7
retractable step to facilitate the