View Of The Front Panel; Battery Installation - PULOX PO-250 Manual De Instrucciones

2.6 V DC ~ 3.6V DC
G. Optical Sensor
Red light (wavelength is 660nm,6.65mW)
Infrared (wavelength is 905nm, 6.75mW)
H. Adjustable alarm range
SpO2: 0%~100%
Pulse Rate: 0bpm~254bpm
5. Installation

5.1 View of the front panel

Fig. 2 Front view

5.2 Battery Installation

Step 1. Refer to Figure 3 and insert the two AAA size batteries properly
in the right direction.
Step 2. Replace the cover.
Please take care when you insert the batteries for the improper
insertion may damage the device.
When you don't use the device for more than 2 hours,please
take out the dry batteries.
5.3 Accessories
Hanging rope, data line, pouch, silicone protector, batteries (optional),
user manual, PC Software
6. Operating Guide
6.1 Application Method
A
1) Insert the two batteries properly in the correct direction and then
replace the cover.
2) Open the clip as shown in Figure 4.
Fig. 3 Batteries installation
EN