Working - Stihl RE 90 Manual De Instrucciones

4 Safety Precautions
► Never use a damaged connecting cable, extension cord
or mains plug.
► If the high-pressure washer is dirty or wet: clean the
high-pressure washer and allow it to dry.
► If the spray attachment is dirty: Clean the spray
attachment.
► Do not modify the high-pressure washer.
► If the controls do not work: Do not operate the high-
pressure washer.
► Fit original STIHL accessories for this high-pressure
washer.
► Attach accessories as described in this User Manual or
in the User Manual for the accessories.
► Do not insert objects into the openings in the high-
pressure washer.
► Replace worn or damaged labels.
► If you have any doubts, be sure to consult a STIHL
dealer.
4.7

Working

WARNING
￭ In certain situations, the user may no longer be able to
concentrate on their work. This may result in the user
stumbling, falling and suffering serious injury.
► Keep calm and plan your work.
► In poor light conditions and poor visibility: Do not
operate the high-pressure washer.
► Use the high-pressure washer on your own.
► Watch out for obstacles.
► Work standing on the ground and keep your balance. If
you have to work at a height: Use a mobile elevating
work platform or secure scaffolding.
► If you start feeling fatigue: Take a break.
0458-002-9821-A
￭ If the high-pressure washer starts behaving differently or
in an unusual way while operating, the high-pressure
washer may be in an unsafe condition. This may result in
serious injury to people and damage to property.
► Stop working, unplug the mains plug from the socket
and consult a STIHL dealer.
► The high-pressure washer must always be operated in
an upright position.
► To ensure an adequate exchange of cooling air, do not
cover the high-pressure washer.
￭ When the spray gun trigger is released, the high-pressure
pump switches off automatically and water stops flowing
out of the nozzle. The high-pressure washer is then in
stand-by mode and is still switched on. If the spray gun
trigger is squeezed, the high-pressure pump switches on
again automatically and water flows out of the nozzle. This
may result in serious injury to people and damage to
property.
► When not operating the machine: Lock the spray gun
trigger.
► Switch off the high-pressure washer.
► Unplug the mains plug of the high-pressure washer from
the socket.
English
43