4- Fixing The Hydraulic Motor Hoses - Nogueira FTN-2500 Manual De Instrucciones

Pass the two hoses through points (5),
3.
(6) and (7).
Secure the hoses at these points with the
4.
clamps (A) and the nuts and washers (B).
(B) Hex nut. M8
(B) Flat washer 8.4 mm
Connect the hose E1 at the point E1 of
5.
the hydraulic block (H).
Connect the hose R1 at the point R1 of
6.
the hydraulic block (H).
The indications E1 and R1 are recorded in
the block hydraulic (H).

4.2.4- Fixing the hydraulic motor hoses

Connect the hoses E4 and R4 to the
1.
hydraulic motor (M).
Pass the two hoses through points (10),
2.
and (11).
M
E4
R4
Instructions Manual
6
H
7
A
10
11
4. Preparation
5
B
M
E2
R2
39