2-Annual Overhaul - Nogueira FTN-2500 Manual De Instrucciones

6.13.2- Annual overhaul
It is recommended to carry out, preferably at
the end of each season, a general overhaul of
the machine, identifying and replacing worn
or damaged parts.
ƒ Do a completely and rigorously machine
washing.
ƒ Dry any water accumulated in the machine
guards.
ƒ Retouch the paint where it is needed.
ƒ Replace worn or damaged parts.
ƒ Apply anti-corrosive oil to the metal parts
of the machine.
ƒ Lubricate properly.
ƒ Attention during cleaning work guarantees
safety to all involved. Lack of attention can
result in personal injury.
ƒ Wear safety clothing, gloves, and goggles
during cleaning. Protect your body and face
from splashes of dirt and oil. Insufficient
body and face protection can cause severe
skin and eye damage.
ƒ Neutral Ph cleaners offer optimum machine
protection. Products with very low or very
high Ph may be corrosive when used on
plastic or rubber surfaces.
Before starting cleaning:
• Park the machine in a flat location and
disconnect the power take-off from the
tractor;
• Lower the equipment to the floor;
• Disconnect the hydraulic components;
• Stop the tractor and remove the ignition
key;
• Engage the tractor's parking brake. Make
sure that the tractor can not move during
cleaning. If necessary, fit the wheels.
CAUTION!
Instructions Manual
6. Maintenance
107