Nogueira FTN-2500 Manual De Instrucciones página 235

The machine does not gather the crop.
PROBABLE CAUSE
Broken safety pin(s).
Tractor below the minimum
recommended power.
Incorrect PTO speed.
Bad or uneven cut.
PROBABLE CAUSE
Dull rotor knives
Worn rotor counter knife
Rotor knives detached from
counter knife
Low production.
PROBABLE CAUSE
Inconstant work speed.
Bad forage wagon transport
logistic or organization.
Inadequate tractor.
Improper ground for mechanized
harvesting.
SOLUTION
Replace the safety pin(s).
Use a tractor with the recommended
power.
Use 1000 rpm rotation (or 540
rpm, depending on the machine
configuration.
SOLUTION
Sharpen the knives
Turn over the knife or replace it
Adjust the spacing between knives
and counter knife
SOLUTION
Try to keep your work speed as
constant as possible.
Organize the positioning and shifting
from forage wagons.
Use a tractor with adequate power.
Cultivate on proper ground.
Instructions Manual
8. Practical Guide
111