Mounting - Polaris 50 Mobile - Dräger Polaris 50 Instrucciones De Montaje Y Uso


Mount the arm
WARNING
The luminaire will fall if fastening is done
incorrectly

The retaining ring must engage into the
groove and must have the same clearance
all round.
1
2

Put the disc 1 in place first, then the retaining
ring 2

Insert the connector with the cover cap and
screw into place

Continue with luminaire head mounting, see
Chapter 9

8 MOUNTING - Polaris 50 Mobile


Remove M3 socket screws from the sides
and detach power supply unit tray.

Loosen the 2 x M6 socket screws on the
lower support tube

Guide the lower support tube's cable through
the roller stand

Attach the lower support tube to the roller
stand using the 2 x M6 socket screws (11.3
Nm / 6 lbf ft)

Push the lower support tube cables and the
power supply unit cables of the same colour
together until they click

Screw the power supply unit tray back in
place using the M3 socket screw and
serrated lock washer.

Push the cables of the upper and lower
support tubes together until the click
EN_GB
33