NSK Surgic Pro2 Manual Del Usuario página 10

No� Key
Setting Key
Enter Key
Cancel Key
LINK Key
COOLANT Key
LIGHT Key
- - -
- - -
- - -
- - -
Name Display
- Select the settings of the control unit, foot control or a
Bluetooth
-
-
Press and hold this key for more than 2 seconds to switch
communication between VarioSurg 3 (option) and Osseo
100+(option) (only when it is connected)�
(See "5 – 5 Link function")
No display:
No display:
Select the coolant solution flow level from 0 to 5�
Select the light level� (OFF, LOW, HIGH)
Displays the current operating torque� (each bar means 10%)
Displays the battery level of the foot control� Check the battery
level before and after treatment� Replace the batteries when the
display of battery level is flashing�
Displays the status of connection with the foot control�
[
[
No display: Not connected
Displays the status of connection between an external terminal
and the control unit�
[
[
No display: Not connected
Function
connection� (See "8 – 1 Setting key")
®
: Connected
: Not connected, paired with VarioSurg 3
Not connected
: Connected
: Not connected, paired with Osseo 100+
Not connected
: 100%
: 50-100%
: 10-50%
(flashing): Less than 10%
: 0%
]
: Connected
]
(flashing): Not connected, paired with the
]
: Connected
]
: Not connected, paired with external terminal
9
Product Description
: 50%
foot control