Implant System - NSK Surgic Pro2 Manual Del Usuario

<Setting values of foot control button>
Setting
value
0 Invalid
1 Coolant solution flow level selection (up)
2 Program number selection (up)
3 Direction of rotation switching
4 Rotation speed setting (up)
5 Rotation speed setting (up)
6 Rotation speed setting (down)
7 Torque setting (up)
8 Torque setting (up)
9 Torque setting (down)
A Coolant solution flow level selection (up)
B Program number selection (up)
C Implant system selection (up)
D Motor LED brightness selection
E Motor LED illumination while button is depressed (Motor will not rotate)
F Irrigation while button is depressed (Motor will not rotate)
8 – 2 Implant system
Eight programs can be set for each of the eight different implant systems�
When you set the program, refer to values the implant manufacturer recommends�
How to change implant system
Press the and on
* Factory settings: See "11 – 8 Factory settings (Implant system)"�
Press and release button
simultaneously to change the implant system�
Function
Press and hold button more than 2 seconds
Invalid
Switching operation between this product and
linked device
Program number selection (down)
Motor LED illumination while button is depressed
(Motor will not rotate)
Rotation speed setting (down)
Rotation speed setting (fast forward to up-direction)
Rotation speed setting (fast forward to down-direction)
Torque setting (down)
Torque setting (fast forward to up-direction)
Torque setting (fast forward to down-direction)
Coolant solution flow level selection (0:no coolant
solution flow)
Implant system selection (up)
Implant system selection (down)
37
Setting