Movement Treadmill R4i Manual De Instrucciones página 89

OPERATIONAL INSTRUCTION
FOLDING THE EQUIPMENT:
1. Restore the tilt to the flat position.
2.Disconnect from the power point before closing.
3.Lift the platform until it is parallel to the vertical post and
close the cylinder in position.
4.Caution: check that the cylinder locking device is engaged.
UNFOLDING THE EQUIPMENT
1. Place one hand on the handrail, use the other to push the
upper part of the running platform forward.
2. Press with one foot on the central section of the cylinder
to disengage the locking mechanism.
3. Allow the platform to start falling slowly before releasing
your hands.
USING THE TREADMILL
1- WALK:
a) Select the desired program, or make the adjustments as preferred.
b) Hold the heart rate sensor or handrail
c) Start training
d) If the treadmill is in the program, it will stop automatically. If you have done the
training manually, simply press the stop key.
37