Hanging The Ceiling Fan (Standard); Hanging The Ceiling Fan (Close-To-The-Ceiling) - Luminance Brands Kathy Ireland Home ASHLAND CF717AP02 El Manual Del Propietario

(Standard Method Using Hanger Ball/Downrod)
6.1
Carefully lift the fan assembly and seat the hanger
ball in the hanger bracket (Figure 14) . The tab on the
hanger bracket must seat in the groove in the hanger
ball .
WARNING
!
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the hanger ball/downrod assembly and
hanger bracket.
Ceiling Cover Installed on the Motor Housing)
7.1
Carefully lift the Fan Assembly up to the Hanger
Bracket . Pass the Hook on the Hanger Bracket
(Figure 15) through one of the Screw Holes (not the
slots) in the Ceiling Cover (Figure 15) . The Hook must
pass from the inside of the Ceiling Cover to the outside .
The Hook will hold the Fan Assembly while connecting
the wiring .
WARNING
!
The hook must pass through the screw hole in the
ceiling cover from the inside to the outside. Any other
hanging method may cause the hook to break and the
fan to fall.
6. Hanging the Ceiling Fan
7. Hanging the Ceiling Fan
(Close-to-the-Ceiling Method with
HOOK
TAB
GROOVE
Figure 14
HOOK ON HANGER BRACKET
MUST PASS THROUGH SCREW
HOLE IN CEILING COVER,
INSIDE OF BRACKET TO
OUTSIDE OF BRACKET
HANGER
BRACKET
Figure 15
Please contact 1-800-777-4440 for further assistance
11
HANGER
BRACKET
HANGER
BALL
NOTE: CEILING COVER,
SUPPLY WIRES AND
FAN WIRES OMITTED
FOR CLARITY.
HOOK
luminancebrands.com
ETL Model No.: CF717-2
CEILING
COVER