Ceiling Fan Assembly - Luminance Brands Kathy Ireland Home BUILDER Serie El Manual Del Propietario

3.1
Disconnect Electrical Power to the Branch Circuit at
the Circuit Breaker Panel or Main Fuse Box before
attempting to install the Ceiling Fan to the Outlet Box .
3.2
Pass the Three 42" Motor Wires through the opening in
the Ceiling Cover .
Be sure the Ceiling Cover is oriented correctly
(Figure 1) .
3.3
Separate, untwist and unkink the Three 42" Motor
Wires .
Route the 42" Motor Wires through the Hanger Ball/
Downrod Assembly (Figure 2) .

3. Ceiling Fan Assembly

!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box or circuit breaker panel before
wiring. All wiring must be in accordance with National
and Local codes and the ceiling fan must be properly
grounded as a precaution against possible electrical
shock.
Figure 1
Figure 2
Please contact 1-800-777-4440 for further assistance
5
WARNING
42" MOTOR
42" MOTOR
WIRES
LEADS
CEILING
COVER
42" MOTOR WIRES
HANGER BALL /
4.5" DOWNROD
ASSEMBLY
luminancebrands.com
U.L. Model No.: 52-ANT