Accessories; Troubleshooting - Luminance Brands Kathy Ireland Home CURVA LED INDOOR CF245LBS00 El Manual Del Propietario

S e e y o u r l o c a l L u m i n a n c e B r a n d s d e a l e r ,
www .luminancebrands .com or our catalog for these

accessories:

• Ceiling Fan Receiver / Remote Controls
• Downrod Extension Kits
• Slope Ceiling Kit
WARNING
!
The use of any other control not specifically approved
for this fan could result in fire, shock and personal
injury.
FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE
TROUBLESHOOTING YOUR FAN.
TROUBLE
1. Fuse or circuit breaker blown.
1. Fan will not start.
2. Loose power line connections to the fan.
3. Fan/Light remote control is OFF.
2. Fan sounds 1. Blades not attached to fan.
noisy.
2. Screws securing fan blades to motor are loose.
3. Fan wobbles 1. Screws securing fan blades to motor are loose.
excessively.
2. Fan blades are not seated properly.
3. Fan blades out of balance.
1. Loose electrical connectors.
4. Light fixture will
not illuminate.
2. Remote control battery is weak.
10. Accessories
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product
by Luminance Brands. Substitution of parts or
accessories not designated for use with this product
by Luminance Brands could result in personal injury
or property damage.

11. Troubleshooting

WARNING
!
PROBABLE CAUSE
23
WARNING
!
SUGGESTED REMEDY
1. Check main and branch circuit fuses or circuit breakers.
WARNING
!
Make sure main power is turned OFF.
2. Check line power connections to fan.
3. Turn ON Fan/Light remote control.
1. Attach blades to fan before operating.
2. Check to make sure the screws which attach the blades to
the motor are tight.
WARNING
!
Make sure main power is turned OFF.
1. Check to be sure screws which attach the fan blade to the
motor are tight.
2. Check to be sure that the screws securing the fan
blades seat firmly.
3. Interchanging an adjacent (side by-side) blade pair can
redistribute the weight and result in smoother operation.
Or use supplied balancing kit to balance blades.
1. Shut off the branch circuit electricity at the fuse box or
breaker panel and check the receiver electrical connectors
for proper installation.
2. Replace the AAA remote batteries.
Please contact 1-800-777-4440 for further assistance
luminancebrands.com
U.L. Model No.: CF245L & CF253L