Luminance Brands Kathy Ireland Home PRO LED Serie El Manual Del Propietario página 9

5. Installing the Ceiling Cover on the Fan Motor
Housing
5.3
Gently pry the Decorative Cap from the Ceiling Cover
(Figure 8) .
5.4
Align the Holes in the Ceiling Cover with the Holes in
the Motor Housing and secure using the Three Screws
previously removed in Step 5 .1 (Figure 9) .
NOTE: For hanging instructions using the Close-
to-the-Ceiling Method, See Page 12, Section
8. Hanging the Ceiling Fan (Close-to-the-Ceiling
Method with Ceiling Cover Installed on the Motor
Housing).
5.5
The Fan comes with Blue, Black and White Wires that
are 80" long .
Measure up approximately 6 to 9-inches above the
Motor Coupling (Figure 10) .
Cut off excess Wires and strip back insulation 1/2-inch
from ends of Wires .
(For Close-to-the-Ceiling Mounting) (Continued)
DECORATIVE CAP
CEILING COVER
Figure 8
SCREWS (3)
(Previously Removed)
CEILING COVER
RUBBER GASKET
Figure 9
MOTOR
COUPLING
Figure 10
Please contact 1-800-777-4440 for further assistance
9
6 TO 9
INCHES
luminancebrands.com
U.L. Model No.: 52-ANT