Kichler 35156 Manual Del Usuario página 10

ASSEMBLY INSTRUCTIONS
11. Once wiring step has been completed, slide the
wired remote receiver in between the hanging
bracket (A) and the top of the downrod ball (B) with
the flat side of the receiver facing the ceiling. Turn
lead wires upward and carefully push them into the
outlet box, with the white and green wires to one
side of the box and the black wires toward the other
side.
12. Loosen one of the shoulder screws without fully
removing it from the hanging bracket (A).
Completely remove the remaining shoulder screw
from the hanging bracket (A).
Assemble canopy (C) by rotating keyhole slot on
canopy (C) over shoulder screw in hanging bracket
(A). Loosely screw the previously removed shoulder
screw into the canopy and onto hanging bracket (A).
Tighten shoulder screws. Securely attach and tighten
the canopy hole cover over the shoulder screws in
the hanging bracket (A) utilizing the keyhole slot
twist-lock feature.
13. Attach blade iron (I) to blade (D) with blade screws.
Do not fully tighten blade screws until each screw
has been started. Then, tighten each blade screw
starting with the center screw. Repeat for remaining
blade irons (I) and blades (D).
11
A
12
Shoulder
Screw
C
13
I
10
B
Shoulder
Screw
Canopy
Hole
Cover
Blade
Screw
D
A