Kichler 35156 Manual Del Usuario página 8

ASSEMBLY INSTRUCTIONS
8. For Canadian installation and for USA fans over 35
lbs, the safety cable must be installed into the house
structure beams using a 3" lag screw. Make sure
that when the safety cable is fully extended the lead
wires are longer than the cable and no stress is
placed on the lead wires.
9. In order to use this remote control the dip switches
must match on both the remote control and the
receiver. Make sure they both have the same
configuration.
Remove the battery cover from the remote control.
Slide dip switches up or down using a small screw
driver (not included). Then match the dip switches
on the receiver to the same position as the remote
control.
Install the battery (included) and replace the battery
cover you previously removed.
8
Safety
Cable
Safety
Cable
Safety
Cable
9
RECEIVER
8
Spring
Washer
Flat
Washer
Lag
Screw
REMOTE CONTROL