Kichler 35156 Manual Del Usuario página 11

ASSEMBLY INSTRUCTIONS
14. Attach blade irons (I) to the underside of the motor
assembly (F) with the blade iron screws.
15. Remove the preassembled mounting screws
from the motor assembly (F).
Feed the wires from the motor assembly (F) through
the center hole in the light kit housing (G). Re-install
the previously removed mounting screws through
light kit housing (G) to the motor assembly (F), then
tighten all screws securely.
14
F
15
11
I
Blade Iron
Screws
F
G