Designations; Abbreviations - Aventics AES Serie Descripción De Sistema

AVENTICS | Bus Coupler AES/Valve Driver AV, EtherNet/IP | R412018139–BAL–001–AF
1.3.3

Designations

The following designations are used in this documentation:
Table 4: Designations
Designation Meaning
Backplane Internal electrical connection from the bus coupler to the valve drivers
and the I/O modules
Left side I/O zone, located to the left of the bus coupler when facing its electrical connectors
Module Valve driver or I/O module
Right side Valve zone, located to the right of the bus coupler when facing its electrical
connectors
Stand-alone system Bus coupler and I/O modules without valve zone
Valve driver Electrical valve actuation component that converts the signal from the backplane
into current for the solenoid coil
1.3.4

Abbreviations

This documentation uses the following abbreviations:
Table 5: Abbreviations
Abbreviation Meaning
AES Advanced Electronic System
AV Advanced Valve
BOOTP Bootstrap Protocol
Enables IP address assignment and setting of further parameters of driveless
computers that obtain their operating system from a boot server.
DHCP Dynamic Host Configuration Protocol
Enables automatic connection of a computer to an existing network, extension
of the bootstrap protocol
DNS Domain Name System
I/O module Input/Output module
EtherNet/IP EtherNet Industrial Protocol
FE Functional Earth
EDS Electronic Data Sheet
MAC address Media Access Control address
nc Not connected
PLC Programmable Logic Controller, or PC that takes on control functions
UA Actuator voltage (power supply for valves and outputs)
UA-ON Voltage at which the AV valves can always be switched on
UA-OFF Voltage at which the AV valves are always switched off
UL Logic voltage (power supply for electronic components and sensors)
69
About This Documentation