Safety Instructions Related To The Product And Technology; Responsibilities Of The System Owner - Aventics AES Serie Descripción De Sistema

72 AVENTICS | Bus Coupler AES/Valve Driver AV, EtherNet/IP | R412018139–BAL–001–AF
Notes on Safety
2.6

Safety instructions related to the product and technology

Danger of explosion if incorrect devices are used!
There is a danger of explosion if valve systems without ATEX identification are used in an
explosive atmosphere.
When working in explosive atmospheres, only use valve systems with an ATEX identification
on the rating plate.
Danger of explosion due to disconnection of electrical connections in an explosive atmosphere!
Disconnecting the electrical connections under voltage leads to extreme differences in electrical
potential.
Never disconnect electrical connections in an explosive atmosphere.
Only work on the valve system in non-explosive atmospheres.
Danger of explosion caused by defective valve system in an explosive atmosphere!
Malfunctions may occur after the configuration or conversion of the valve system.
After configuring or converting a system, always perform a function test in a non-explosive
atmosphere before recommissioning.
Risk of uncontrolled movements when switching on the system!
There is a danger of personal injury if the system is in an undefined state.
Put the system in a safe state before switching it on.
Make sure that no personnel are within the hazardous zone when the valve system is
switched on.
Danger of burns caused by hot surfaces!
Touching the surfaces of the unit and adjacent components during operation could cause burns.
Let the relevant system component cool down before working on the unit.
Do not touch the relevant system component during operation.
2.7

Responsibilities of the system owner

As the owner of a system that will be equipped with an AV series valve system, you are responsible
for
ensuring intended use,
ensuring that operating employees receive regular instruction,
ensuring that the operating conditions are in line with the requirements for the safe use of the
product,
ensuring that cleaning intervals are determined and complied with according to environmental
stress factors at the operating site,
ensuring that, in the presence of an explosive atmosphere, ignition hazards that develop due to
the installation of system equipment are observed,
ensuring that no unauthorized repairs are attempted if there is a malfunction.
DANGER
CAUTION