MarelliMotori MEC-100 Manual De Instrucciones página 85

5.6.4. Printing a Set of Parameters
To print a whole set of parameters:

Connect to the MEC-100 (see Par. 5.3.3) if required.

Enter the password if required (see Par. 5.4.1).

Click the button shown in Fig. 5.6.4.a. A new window will appear (see Fig. 5.6.4.b).

Type the required data and click the button Preview. A preview of the parameter list will appear.

To print it, click the button shown in Fig. 5.6.4.c.
Fig. 5.6.4.a
Selecting the Print operation
5.7. DEFINITION OF CONFIGURABLE PARAMETERS
Each one of the 10 parameter categories is characterized by its own window, which includes as many configurable fields as
many parameters are here considered and contained. Each field is generally characterized by:

Parameter name.

Unit of measurement.

Maximum and minimum entry limits.

Entered parameter.
At the moment of the first configuration operation, each field includes a default value which prevents the MEC-100
from malfunctions or damages. ALL PROTECTIONS AND LIMITATIONS ARE DISABLED.
To configure all the MEC-100 parameters through the MEC-100 Interface System, carefully read the
following instructions.
Remember that the parameters are divided into 9 categories according to their type; each category is
associated with a single setting window.
As parameters are entered on an individual window basis, other parameters in other windows might not be
consistent with the ones you have just entered.
Check all the parameters you entered before you start using MEC-100.
The below a description of the configurable fields is provided: they are divided based on the group they belong to.
Key:

Numeric value entry.

Value calculated, measured and/or displayed by MEC-100 Interface System.

Choosing one option leads to the exclusion of the other options.

Enabling flag.

Pull-down menu option.
963857137_G
Fig. 5.6.4.b
Selecting the Print operation
MEC-100
Fig. 5.6.4.c
Selecting the Print operation
85