Assembly Steps - Brinkmann 810-3826-S Manual Del Propietário

Left Leg
Leg Beam
Left Leg
Leg Beam
Right Leg
Right Leg

ASSEMBLY STEPS

Choose a good, cleared assembly area
and get a friend to help you put your grill
together. Lay cardboard down to protect grill
finish and assembly area.
Step 1
Remove two pre-attached bolts on one end
of the leg beam. Attach leg beam to left leg
by using the two pre-attached bolts just
removed. Repeat for other leg.
Step 2
Remove two pre-attached bolts from right
leg. Then remove two pre-attached bolts
and nuts from firebox support bracket. Set
aside for later use.
Note: Firebox support bracket will not be
used for portable grill assembly.
Firebox Support Bracket
8