Modification Of Settings - Ingeteam INGECON SUN EMS Manual De Configuración

Configuration manual Ingeteam

3.2.2 Modification of settings

The EMS energy manager has a web server that allows the user to see the IP address and other
data. Settings can also be changed from this website.
The web server can be accessed by entering the EMS energy manager's IP address in any web
browser on their device.
The options available in the menu can vary depending on the type of manager. These are the
main options:
Device Status. Displays general status information of the EMS energy manager, Devide ID, date,
version FW, version HW, connectivity, etc ...
It also shows the list of Ingeteam devices that are connected in its serial line.
Serial Interface. Displays serial communication information between the EMS energy manager
and the inverters. In addition it allows to configure the parameters of said serial line.
Ethernet. Allows network settings of the EMS energy manager's Ethernet interface to be
configured.
Wi-Fi. Displays information about the Wi-Fi status of the EMS energy manager. In addition, it
allows configuration of the operating mode, the SSID to which the EMS energy manager connects
and the network settings.
Network Services. Allows configuration of network services, such as DNS (Domain Name
System) and NTP (Network Time Protocol) network services.
Network services. It allows you to configure the DNS (Domain Name System) and NTP (Network
Time Protocol) network services.
Device System. Restart the system and set the default settings.
Device Update. Allows management of firmware updates of the EMS power manager.
40 AAX2026IQM05_B.docx