Left/right and direction information
The left/right and direction information in this operating manual is
based on view direction towards the material.
Safety fixtures
Safety device
The pneumatic tool has a safety device on the tool nose. Discharge
is only released when the safety device is pushed in.
Lock-out safety device
The PKT-2-CLIP45-SY pneumatic tool is equipped with a lock-out
safety device on the top end of the magazine. The lock-out safety
device blocks the discharge when there are no fasteners left in the
magazine.
WARNING!
If the safety device is defective or bypassed
maximum severity injuries are possible when
operating the pneumatic tool.
Only use the pneumatic tool if the safety
device is functional.
Only release the pneumatic tool when the
tool nose is firmly pressed against the
material.
Description
15