Prebena PKT-2-ES40-S Manual Del Usuario página 82

Preparing the pneumatic tool
Check the condition
Check the following points in particular:
All pneumatic tool parts and all accessory parts must be
-
securely attached.
The safety fixtures should not be blocked or otherwise
-
impaired in function.
The spring of the safety device should not be damaged.
-
The pneumatic tool and its accessories should not show any
-
external damage such as scratches or dents.
Scratches in the paint of the housing or of the magazine are
not considered damage.
Do not connect a damaged pneumatic tool to a compressed air
cartridge.
Have specialized personnel repair a damaged pneumatic tool
before placing it in service.
18
WARNING
An injury hazard exists when operating a
damaged pneumatic tool, or if accessories are
not properly mounted.
Check the condition of the pneumatic tool
prior to each use.
Only use pneumatic tools that are in
trouble-free condition.