Prebena PKT-2-ES40-S Manual Del Usuario página 84

Preparing the pneumatic tool
Connecting the compressed air cartridge
Remove the protective cap from the connection thread of the
compressed air cartridge.
Check the connection and the connection thread of the
compressed air cartridge for foreign objects and fouling.
Clean the connection and the connection thread if necessary.
Check the status of the pneumatic tool (see page 18).
Slide the compressed air cartridge into the holders (1.).
Screw the compressed air cartridge hand-tight into the thread on
the connection element (2.).
20
WARNING
Inadvertent release can result in serious or
fatal injuries.
Do not point the pneumatic tool at people
or animals.
Empty the magazine before connecting.