Amibot Spirit MOTION Manual Del Usuario página 19

Operating the appliance
Setting the time
00:00
00:00
Figure 1
00:00
07:30
Figure 3
You must be near the robot to set the time. The robot must not
be in standby mode to set the time. Press the AUTO button on
the robot or on the remote control to come out of standby mode.
Then press the Set the time button on the remote control (Figure 1).
The time flashes. Use the up/down arrows to modify the hour and
minutes (Figure 2). Press the Set the time button again to confirm
the time (Figure 3). A quick beep indicates that the time is set.
00:00
00:00
00:00
07:30
17
00:00
00:00
00:00
07:30
Figure 2
EN