Amibot Spirit MOTION Manual Del Usuario página 38

EN
Troubleshooting
Appliance
04
suction lost
The appliance
05 is hard to
manoeuvre.
Scheduling
06 does not work
correctly.
1. The dustbin is full.
2. The cyclone
protection filter is
dirty.
3. The central brush or
the side brushes are
blocked.
1. The wheels are
jammed.
2. The gap and
obstacle sensors are
dirty.
3. Problem with the
camera.
1. The robot is not
switched on.
2. The robot battery is
weak.
3. The robot is not
placed on its home
base.
4. Scheduling has been
cancelled.
36
1. Empty the dustbin and
clean the filters.
2. Clean the cyclone
protection filter.
3. Remove any hair and
debris from the brushes.
Check that there is no dirt
obstructing the robot.
1. Clean the vacuum wheels
and remove the hair and
other debris caught up
around them.
2. Gently clean all of the
sensors on the appliance.
3. Gently clean the camera
with a soft cloth.
1. Switch the robot on.
2. Recharge the robot before
starting a new cleaning
cycle.
3. Plug the home base in and
place the robot on top.
4. Check the schedule and
reschedule the cleaning
cycle, if necessary.