Gap And Power Sensors; Microfibre Cleaning Pads - Amibot Spirit MOTION Manual Del Usuario

EN
Maintenance
water. Regularly check that the drip plugs under the water tank are
not obstructed by debris. You must also check the vibrating module.
Limescale build-up could stop it from working correctly.
Clean these elements with clean water dry them with a soft cloth.
Wait until the vibrating water tank is fully dry before reusing it.

Gap and power sensors

The gap and
robot and on the home base must be cleaned once a
week with a soft cloth. Never let the sensors get wet.

Microfibre cleaning pads

The cleaning pads should be washed regularly to ensure that they
clean effectively. They are machine washable at 30° maximum or can
power sensors
30
on the bottom of the