RK Rose+Krieger Multilift I Manual De Montaje página 96

Set-up and function
Electrical connection to a controller provided by the operator > Electrical connection - Multilift I (Synchro)
Plug connector pin assignment
96
Fig. 18: Plug connector pin assignment
1 Adapter cable with 8-pin DIN plug connector
2 Adapter cable with Mini-Fit Jr. plug connector
The socket inlet on the motor housing of the Multilift I lifting column
can be connected to the controller provided by the operator with
two different adapter cables (Fig. 181 + 2).
Pin
DIN plug con-
nector
1 + 7
-
3
6
8
-
5
2 + 4
Load [N]
0
1000
3000
Lifting column Multilift I/Multilift II
Function
Mini-Fit Jr.
1 Motor +
2 N/A
3 +5 V for hall sensor
4 Limit switch (internal)
5 Hall sensor pulse output
6 N/A
7 GND for hall sensor
8 Motor -
Current
I [A]
1
3
4.5
U [V DC]
24
24
24
20.02.2019