Cubierta De La Base; Removing The Base Cover - Dell EMC Precision 7750 Manual De Servicio

Ocultar thumbs Ver también para EMC Precision 7750:
Tabla de contenido

Publicidad

Steps
1. For M.2 2280 SSD:
a. Place the M.2 SSD onto its slot on SSD carrier.
2. For M.2 2230 SSD:
a. Place the M.2 SSD into the SSD holder.
b. Replace the (M2x2) screw to secure the M.2 SSD to the holder.
c. Place the M.2 SSD with its holder on the SSD carrier.
3. Place the thermal plate above the M.2 SSD module.
4. Replace the (M2x3) screw to secure the SSD thermal plate to the M.2 SSD.
5. Replace the SSD module in its slot on the computer.
6. Replace the (M2x3) screw to secure the SSD module in place.
Next steps
1. Install the
SSD
door.
2. Install the
SD
card.
3. Follow the procedure in

Cubierta de la base

Removing the base cover

Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
About this task
The figure indicates the location of the base cover and provides a visual representation of the removal procedure
after working inside your
computer.
before working inside your
computer.
Desmontaje y reensamblaje
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

P44e

Tabla de contenido