Placa Base; Removing The System Board - Dell EMC Precision 7750 Manual De Servicio

Steps
1. Adhere the GPU power cable into its slot on the computer.
2. Disconnect the GPU power cable from the connector on the system board.
3. Slide the GPU power cable connector into its slot to connect the GPU power cable to the GPU card.
4. Lock the GPU power cable connector to secure the GPU card.
Next steps
1. Install the keyboard.
2. Install the keyboard lattice.
3. Install the battery.
4. Install the base cover.
5. Install the SD card.
6. Follow the procedure in

Placa base

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the SSD door.
4. Remove the secondary M.2
5. Remove the base cover.
6. Remove the battery.
7. Remove the primary M.2
8. Remove the SIM card.
9. Remove the secondary
10. Remove the WWAN card.
11. Remove the WLAN card.
62 Desmontaje y reensamblaje
after working inside your computer.
before working inside your
SSD.
SSD.
memory.
computer.