Tabla de contenido
Publicidad
Steps
1. Align and place the speaker module into its slot on the top edge of the palmrest.
2. Adhere the three piece adhesive tape to secure the speaker cable in place on the palmrest.
Next steps
1. Install the
system
board.
2. Install the
GPU
card.
3. Install the
GPU power
cable.
4. Install the
inner
frame.
5. Install the
heat-sink
assembly.
6. Install the
primary
memory.
7. Install the keyboard.
8. Install the
keyboard
lattice.
9. Install the
WLAN
card.
10. Install the
WWAN
card.
11. Install the
secondary
memory.
12. Install the
SIM
card.
13. Install the
primary M.2
SSD.
14. Install the battery.
15. Install the
base
cover.
16. Install the
secondary M.2
17. Install the
SSD
door.
18. Install the
SD
card.
19. Follow the procedure in
SSD.
after working inside your
computer.
Desmontaje y reensamblaje
71
Publicidad
Tabla de contenido
