Unidad De Estado Sólido; Removing The Primary M.2 Solid-State Drive - Dell EMC Precision 7750 Manual De Servicio

Ocultar thumbs Ver también para EMC Precision 7750:
Tabla de contenido

Publicidad

Steps
1. Connect the battery cable to the connector in the battery.
2. Place the battery onto its slot in the computer.
3. Replace the three (M2x5) screws to secure the battery to the computer.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Follow the procedure in
Unidad de estado sólido

Removing the primary M.2 Solid-state drive

Prerequisites
NOTE:
For computers shipped with M.2 2280 or 2230 SSD installed in slot 3, slot 4, and/or slot 5.
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
About this task
The figure indicates the location of the primary M.2 SSD and provides a visual representation of the removal procedure.
28
Desmontaje y reensamblaje
after working inside your
computer.
before working inside your
computer.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

P44e

Tabla de contenido